The Manual Station Relocator is designed to lower the height of a fire alarm pull station to meet ADA requirements. Most existing pull stations are mounted 60 inches (1524 mm) or higher above the floor. The Relocator lowers the height without the need for pulling new wires and moving the existing electric box.
The Relocator is the easiest and most economical way to lower existing pull stations. Simply remove the existing pull station from the wall. Connect field wiring to Relocator terminals. Reconnect the existing (or new) pull station to wire leads on the front of the Relocator. The Relocator is made from rugged aluminum and finished with an attractive beige finish. A large blue/white wheelchari decal is applied to the front to clearly indicate pull station accessibility.
Link to this product
For web page (with image):
UL Listed (all models comply with ADA Code of Federal Regulation Chapter 28 Part 36 Final Rule)
Construction: Aluminum with beige paint finish Markings: Supplied with large blue/white wheelchair decal Field Wire Connections: Terminals - #12 AWG (2.5 mm2) maximum Operating Environment: 85% @ 30C relative humidity; 32-120F (0-49C) ambient temperature Mounting: Mounts to flush one-gang electrical box