EC-50R/ -100R
Reflective Beam Smoke Detector
Description
The EC-50R/-100R comprises a transmitter and receiver in a single enclsure and is usually installed between 19 inches and 24 inches below the ceiling. The transmitter emits an invisible infrared light beam that is reflected via a prism mounted directly opposite and with a clear line of sight. The reflected infrared light is detected by the receiver and analyzed. Smoke in the beam path will reduce the received infrared light proportionally to the density of the smoke. The detector analyzes this attenuation or obscuration of light and acts accordingly. Detectors are typically mounted within +/- 30 feet (9.14m) of a potential fire source. Consult your Authority Having Jurisdiction for spacing requirements specific to your locality.
|
Link to this product
|
Catalog Numbers
Catalog Number
![]() |
Description
![]() |
![]() |
Specifications
Approvals
Agency Approvals
- UL Listed
- ULC Listed
- MEA Approved
- CSFM Listed
Power Supply: 10.2 Vdc to 30 Vdc (continuous power)
Current: Standby - Less than 4 mA; Alarm/Trouble - Less than 14 mA
Contacts: Alarm - Normally open, rated 2A, 30 Vdc, resistive; Trouble - Normally Closed rated 2A, 30Vdc, resistive
Signal Delay: Alarm and trouble - 10 seconds
Reset Time: > 5 seconds (power down)
Documentation
Data Sheets
Installation Instructions
- EC-50R-100R_Install.pdf
EC-50R EC-100R User Guide
- EC5000 UserGuide