30-3013
Hazardous Location Smoke Detector
Description
The model 30-3013A1N12F detector is a high performance, photoelectric smoke detector built for use in hazardous locations. They are corrosion-resistant and feature a non-conducting aluminum alloy retaining ring that protects the detector sensor against the effects of explosions and other catastrophic events.
|
Link to this product
|
Catalog Numbers
Catalog Number
![]() |
Description
![]() |
![]() |
Specifications
Approvals
Agency Approvals
- FM Approved for smoke detection in Class I, Division 1 hazardous locations
- Class I Div 1 Groups B, C, D T4
- Class I Div 2 Groups A, B, C, D T4
- Class I Zone 1 AEX db Ia IIC T4 Gb
- Tamb -20C to +65C
- IP44
- IECEx Zone approved
- IECEx FMG15.0014X
- Ex db ia IIC T4 Gb
- Tamb -20C to +65C
- IP44
- IP44 ingress protection level suitable for onshore or offshore requirements
- Operating Voltage: 12 - 30V DC (24V DC nominal)
- Power Consumption: 3.5W Max (2.75W at 24V DC)
- Smoke alarm relay: Form C, 5A at 30V DC, normally open/normally closed contacts and normally deenergized position
- Trouble relay: Form A, 5A at 30V DC, normally open contacts and normally energized operation
- Auxiliary relay: Form C, 5A at 30V DC, normally open/normally closed contacts and normally deenergized operation
- Temperature Range: Operatin: -20C to +65C (-4F to 149F); Storage: -55C to 70C (-67F to 158F)
- Humidity Range: 5 to 95% relative humidity
- Ingress Protection: IP44 (ceiling mount application only)
- Current Output: 0 - 20mA (+/-0.3 mA) DC current, with max loop resistance of 300 ohms from 12 - 17.9V DC, 500 ohms from 18 to 19.9V DC and 600 ohms
- Terminals: Rated for 14 - 18 AWG or 2.5 - 0.75 mm2 wire.
- Thread Options: 3/4 inch NPT or M25
- Enclosure Material: Detector: Polycarbonate/ABS, Junction Box: Copper-free aluminimum (painted)
Documentation
Data Sheets
Installation Instructions
Marketing Releases
Installation Instructions
Marketing Releases