Supports two receivers with two phone numbers each
Programming from front panel controls or PC with appropriate software
Can function as a modem
The Edwards F-DACT optional DACT/Dialer is a multifuntion communications module that provides communications, modem capability, and LCD display functions. Its primary function is as a Digital Alarm Communicator Transmitter (DACT). As a DACT, it transmits event messages to a Digital Alarm Communicator Receiver (DACR) at a monitoring facility. The monitoring facility then notifies the fire department and other responsible parties of the event. Programmable options include single or dual reporting to two DACRs.
The DACT module can also be used as a modem to connect the panel to both a local and remote computers for uploading and downloading of configuration data (programming), panel status and event history. For security, the modem can be configured to accept programming on incoming calls or it can be required to call a preprogrammed number before accepting downloads and sending uploads.
The DACT module can be configured to work as all of the above, or as only an LCD display or LCD display and modem.
*NOTE: The F-DACT cannot be used with a one zone fire alarm panel. If the application requires the F-DACT Dialer, you must purchase a panel with three or more zones.
Link to this product
for email:
For web page (with image):
Catalog Numbers
Catalog Number
Description
Specifications
Approvals
Agency Approvals
NFPA 72 UL 864 Listed ULC S527-M87 Listed FCC/CFR 47 Parts 15 & 68
Specifications
Contact ID (SIA DC-05), 4/2 (SIA DC-02 P3) communications protocol
Two RJ31X (plug to plug) cords supplied with DACT
Two or one loop start lines on the public switched telephone network. Pulse or DTMF
RJ31X/CA31X equiv. or RJ38X/CA38X equiv. telephone wall connector