Shopping Cart |  My Account |  Rep's Web

5533M Series

Adaptatone Electronic Signal Explosionproof, Two Outputs

Description


  • 55 tone capability - No additional tone modules needed

  • Internal volume control

  • Corrosion resistant heat flowed epoxy finish

  • Supplied with factory sealed 1/2" (13mm) threaded fitting for quick installation




The Edwards 5533M Adaptatone Signal is an explosionproof, heavy-duty industrial, tone-selectable, signaling device capable of producing volume-controlled, high-decibel tones. The signal accepts up to two contact closures and delivers two audible output signals selected from the 55 tones available. The two tones may be selected by setting miniature switches within the unit. One of the tones can be assigned a priority status to override the other tone. For more information on priority tone operation and a complete listing of all 55 tones, see Tone Selection and Priority Operation listed under catalog pages on the left hand side of this page.

The electrical inputs activating the Adaptatone Signal are received from field-wired, normally open contacts or from the Cat. No. 5538-4 Adaptatone Signal Actuator. (Not suitable for hazardous locations.)

The 5533M Adaptatone mounts on any surface using three bolts. See Adaptatone Signaling Installation under the catalog pages on the left.

For use where a high decibel sound is required for alert or evacuation in hazardous locations. Typical applications include signaling use in mining, granaries, flour mills, tankers, refineries, laboratories, spray booths, and other hazardous locations.

5533M Series

Link to this product

Catalog Numbers

Purchase from the Edwards on-line store or Locate a distributor in your area
Enter your Zip Code:
Catalog Number
Description
  5533M-AQ

Adaptatone Hazardous Location Multiple Tone Industrial Signal
24VDC, 0.47A; 36VDC, 0.6A; 24VAC 50/60Hz, 1.32A

$2,850.00
  5533M-Y6

Adaptatone Hazardous Location Multiple Tone Industrial Signal
125VDC, 0.13A; 250VDC, 0.07A; 120VAC 50/60Hz, 0.26A; 240VAC 50/60Hz, 0.19A

$2,888.00

Specifications

Approvals

Agency Approvals
  • UL 464 and 1203 Listed
  • UL Listed for Class I, Division 1 and 2, Groups B, C, and D hazardous locations
Specifications
  • Speaker swivels 180 vertically or horizontally depending on orientation of mounting bracket
  • 30" (762mm) numbered wire leads
  • Heavy duty zinc cast construction